
Published: 16 November 2026 ยท Updated: 16 November 2026
Add and subtract time durations, find the gap between two clock times, and calculate hours worked with gross pay. It starts with 2h 45m + 1h 30m = 4h 15m. Free, no sign-up.
Time is base 60, not base 100 โ this tool carries the minutes for you. Add durations, measure the gap between two times, or work out a shift's hours and pay, including overnight shifts.
Researched by MixKhazana Team · Last updated 16 November 2026 · Data: standard time arithmetic; 24-hour clock inputs
Time is base 60, not base 100: 1 hour is 60 minutes, and 1 minute is 60 seconds. That is why 2h 45m + 1h 30m is 4h 15m, not 3h 75m โ the 75 minutes carry 1 hour and leave 15. The carry rule is the whole difficulty of time arithmetic, and it is exactly what this tool does for you. It is also why 7h 30m is 7.5 decimal hours, not 7.30: 30 minutes is half an hour.
| Minutes | Decimal hours | Minutes | Decimal hours |
| 1 | 0.02 | 30 | 0.50 |
| 5 | 0.08 | 40 | 0.67 |
| 10 | 0.17 | 45 | 0.75 |
| 15 | 0.25 | 50 | 0.83 |
| 20 | 0.33 | 55 | 0.92 |
Decimal hours = minutes / 60. Payroll systems use decimal hours, which is why timesheets convert 7h 30m to 7.50, not 7.30.
This tool uses the 24-hour clock for its time inputs (09:00, 17:30, 22:00), because it removes all AM/PM ambiguity โ the source of most time-entry errors. To convert: PM times add 12 (3:30 PM = 15:30), except 12 PM itself, which is 12:00; 12 AM (midnight) is 00:00. If your device shows a 12-hour picker, it converts for you automatically.
Add the minutes first, then carry every 60 minutes into an extra hour. 2h 45m + 1h 30m gives 75 minutes, which carries 1 hour, leaving 4h 15m. This tool does the carrying automatically, including inputs over 60 minutes.
Borrow 1 hour as 60 minutes. For 5h 10m - 2h 40m, borrow to get 4h 70m - 2h 40m = 2h 30m. If the whole second duration is larger, the result is negative, shown with a minus sign.
If the end time is earlier than the start time, the end is treated as the next day. 22:00 to 06:00 is 8 hours: 2 hours to midnight plus 6 hours after. Equal start and end times are treated as a full 24 hours.
Decimal hours write minutes as a fraction of an hour: 30 minutes is 0.50 hours, 15 minutes is 0.25. Payroll multiplies hours by the hourly rate, which needs a single decimal number, so 7h 30m becomes 7.50, never 7.30.
No. It calculates straight gross pay at one rate, with the unpaid break deducted. Overtime rules (time-and-a-half after 8 hours, weekend rates) vary by country, contract and law, so apply your own overtime rules to the hours shown.
Before tax and before any deductions: gross pay. Net pay depends on income tax, social contributions and your personal circumstances, which differ everywhere. Use a salary calculator for net estimates.
Yes. The tool normalises them: 90 minutes in the minutes box counts as 1 hour 30 minutes. This is handy when adding up durations from several sources without pre-converting.
Disclaimer: a general calculation aid. Pay figures are gross, before tax and deductions, with no overtime rules applied; your contract and local law govern actual pay.
Card photos: Coyau / Wikimedia Commons, CC BY-SA 3.0 ยท Joost J. Bakker / Wikimedia Commons, CC BY 2.0 ยท Lukas Blazek / Pexels, Pexels licence
โ๏ธ Flying somewhere? Try the Free Flight Tools hub โ distance, flight time estimates, airport codes and CO2, free with no sign-up.